Custom Engineering TG1260 series, User Manual

Page: 45 / 100

2. PRINTER FUNCTIONS
2-28
TG1260/2460
3 6 $ D 1 $
[Name] Print counter.
[Format] ASCII GS c
Hex 1D 63
Decimal 29 99
[Description] Sets the serial counter value in the print buffer and increments or decrements the counter
value.
[Notes] • After setting the current counter value in the print buffer as print data (a character
string), the printer counts up or down based on the count mode set. The counter value
in the print buffer is printed when the printer receives a print command or is in the buffer
full state.
• The counter print mode is set by
$1D $43 $30 .
• The counter mode is set by $1D $43 $31 or $1D $43 $3B .
• In count-up mode, if the counter value set by this command goes out of the counter
operation range set by
$1D $43 $31 or $1D $43 $3B , it is forced to convert to the
minimum value.
• In count-down mode, if the counter value set by this command goes out of the counter
operation range set by
$1D $43 $31 or $1D $43 $3B , it is forced to convert to the
maximum value.
[Default]
[Reference] $1D $43 $30, $1D $43 $31, $1D $43 $32, $1D $43 $3B
[
Example]
n 6 6 $ D 1 $
[Name] Select font for HRI characters.
[Format] ASCII GS f n
Hex 1D 66 n
Decimal 29 102 n
[Range] n = 0, 1, 48, 49
[Description] Selects a font for the HRI characters used when printing a bar code.
n selects a font from the following table:
n t n o F
8 4 , 0 . A t n o F
9 4 , 1 . B t n o F
[Notes] The HRI characters are printed at the position specified by the command $1D $48.
[Default] n = 0
[Reference] $1D $48, $1D $6B
[
Example]
n 8 6 $ D 1 $
[Name] Set bar code height
[Format] ASCII GS h n
Hex 1D 68 n
Decimal 29 104 n
[Range] 1
≤
n
≤
255
[Description] Sets the height of the bar code. n specifies the number of dots in the vertical direction.
[Notes]
[Default] n = 96 (12 mm)