2. PRINTER FUNCTIONS
2-10
TG1260/2460
n = 1. 49 Turns on underline mode (1-dot thick)
n = 2. 50 Turns on underline mode (2-dot thick)
[Notes]
• The printer can underline all characters but cannot underline the space set by
$09
and
right-side character spacing.
• The printer cannot underline 90° clockwise rotated characters and white/black inverted
characters.
• When underline mode is turned off by setting the value of
n
at 0 or 48, the following
data is not underlined.
• Underline mode can also be turned on or off by using
$1B $21.
Note, however, that the
last command received is effective.
[Default]
n=0
[Reference]
$1B $21
[Example]
0
3
$
B
1
$
[Name]
Select 1/8-inch line spacing
.
[Format]
ASCII
ESC
0
Hex
1B
30
Decimal
27
48
[Description]
Selects 1/8-inch line spacing.
[Notes]
[Default]
[Reference]
$1B $32, $1B $33
[Example]
2
3
$
B
1
$
[Name]
Set line spacing at 1/6 inch
.
[Format]
ASCII
ESC
2
Hex
1B
32
Decimal
27
50
[Description]
Selects 1/6 inch line spacing.
[Notes]
[Default]
[Reference]
$1B $30, $1B $33
[Example]
n
3
3
$
B
1
$
[Name]
Set line spacing.
[Format]
ASCII
ESC
3
n
Hex
1B
33
n
Decimal
27
51
n
[Range]
0
≤
n
≤
255
[Description]
Sets the line spacing at [
n
×
(vertical or horizontal motion unit)] inches.
[Notes]
• Horizontal and vertical motion units are specified by the command
$1D $50
. Changing
the horizontal or vertical motion unit does not affect the current line spacing.
• The command
$1D $50
can change the horizontal (and vertical) motion unit.
However, the value cannot be less than the minimum vertical movement amount.
• In standard mode, the vertical motion unit is used.
• The maximum line spacing is
n
= 255 (
≅
32mm).
