CC650
Production / Industrial Hose Crimper
11
HOW TO MAKE MINOR CORRECTIONS
•
Due to variations in hose and fi tting tolerances a minor crimp
adjustment may be required if the measured diameter of the final
crimp is not within the hose and fi tting manufacturer’s specifi cations.
ACT
TM
technology makes minor corrections a simple process which
requires no addition or subtraction.
If the fi nished crimp diameter is not within the required specifi cations:
•
Press the
ADJUST CRIMP
button.
•
Enter the measured diameter of the fi tting in either inches
or mm
(
Do not enter the amount of correction
)
and press
ENTER.
•
Press
OK
.
•
Make another crimp and verify that the fi tting is within
specifi cations.
EXAMPLE: If the hose and fi tting manufacturer specifi es that the
fi nished crimp should measure 1.500 to 1.520 and the measured
crimp diameter was 1.530, simply enter the measured diameter
(1530 - Controller will supply 3 decimal places) and press SAVE.
The fi nished crimp diameter can be entered in either in or mm and
ACT
TM
will make the conversion.
While a single correction will usually bring the hose and fi tting into
specifi cations, the process can be repeated as many times as is
required.
AccuCrimp ACT
TM
CONTROL PANEL QUICK START
