CC650
Production / Industrial Hose Crimper
12
HOW TO ADD A SAVED DIE
Up to 50 different dies can be saved in the computer memory.
These dies can be recalled in the set up process eliminating the
need to re-enter the die size each time.
To enter a saved die:
• From the
OPTION
screen, press
SETUP MODE
.
• Select
SAVED DIES.
• Select the save position (1-50) where the die is to be saved
and press the
EDIT
button.
• Enter a die description (up to 12 alpha/numeric characters).
•
Enter diameter units (inch or metric).
•
Enter the closed diameter of the die.
•
Press
SAVE
and
EXIT.
•
The saved die will now appear on the
SELECTED DIE
screen. From this screen individual dies can be cleared or
edited.
HOW TO RECALL A SAVED DIE
•
Select
CRIMP TO DIAMETER
, and from the
OPTION
screen,
select
USE SAVED DIE
.
•
Select the saved die (1-50) and press
LOAD
and then
OK
.
The die parameters will now be used for the crimp process.
From the
ENTER CRIMP
screen press
MANUAL
.
•
The saved die will now be shown on the crimp parameters
screen.
AccuCrimp ACT
TM
CONTROL PANEL QUICK START
