Custom Audio Electronics VKP112H, User Manual

Page: 43 / 64

4
Remove any scraps of paper and
the accumulated paper dust on the cutter input
by using compressed air.
CUTTER
3
Lift the ejector group
to the maximum opening position.
2
Unblock the ejector group
by using the lever.
1
Disconnect the
power supply cable.
ATTENTION:
Do not touch the head heating line with bare hands
or metal objects.
Do not perform any operation inside the printer
immediately after printing because the head and
motor tend to become very hot.
ATTENTION:
Do not use alcohol, solvents, or hard brushes. Do not let
water or other liquids get inside the machine.
ON
6. MAINTENANCE
User Manual
VKP112H 43