Custom Audio Electronics VKP112H, User Manual

Page: 41 / 64

PRINTING HEAD
3
Lift the ejector group
to the maximum opening position.
2
Unblock the ejector group
by using the lever.
5
Clean the printing head by using
a non-abrasive cloth moistened with isopropyl.
4
Unblock the printing mechanism
as shown in figure.
1
Disconnect the
power supply cable.
ISOPROPYL ALCOHOL
ATTENTION:
Do not use solvents or hard brushes. Do not let water or
other liquids get inside the machine.
ON
ATTENTION:
Do not touch the head heating line with bare hands
or metal objects.
Do not perform any operation inside the printer
immediately after printing because the head and
motor tend to become very hot.
6. MAINTENANCE
User Manual
VKP112H 41