Custom Audio Electronics VKP112H, User Manual

Page: 39 / 64

3
Lift the ejector group
to the maximum opening position.
2
Unblock the ejector group
by using the lever.
4
Unblock the printing mechanism
as shown in figure.
1
Disconnect the
power supply cable.
ATTENTION:
Do not touch the head heating line with bare hands
or metal objects.
Do not perform any operation inside the printer
immediately after printing because the head and
motor tend to become very hot.
SENSORS AND PAPER PATH
5
Carefully clean the printer sensors by using
compressed air. Remove any scraps of paper and
the accumulated paper dust on the printing
roller and on the area around the sensors.
ATTENTION:
Do not use alcohol, solvents, or hard brushes. Do not let
water or other liquids get inside the machine.
To remove paper scraps, use tweezers or compressed air.
ON
Alcohol, solvent cohol, solve
6. MAINTENANCE
User Manual
VKP112H 39