Custom Audio Electronics VKP112, User Manual

Page: 17 / 48

1.5 MAINTENANCE
WARNING
Make sure no water or other liquids seep inside the printer.
BEWARE
Before any type of work is done on the machine, disconnect the power supply cord from
the mains outlet.
ATTENTION
Do not touch the head heating line with bare hands or metal objects. Do not perform any
operation inside the printer immediately after printing because the head and motor tend
to become very hot..
1.5.1 Open the printer
To open the printer proceed as follows:
• turn down the unblocking lever and lift up the ejector unit to the maximum opening position (see
fi g.1.5).
• push down the rubber feet and unhook the printing mechanism (see fi g. 1.6)
NOTE
After each maintenance operation is recommended to check and remove possible scraps of
paper.
(Fig.1.5)
1. INSTALLATION AND USE
User Manual
VKP112 1-5