Custom Audio Electronics VK80, User Manual

Page: 108 / 116

With the tools in the “Network setup” section, it is possible to set up the same ethernet parameters of the device that are
conigurable in the device’s setup mode (see chapter 5).
The following igure shows the page for the “ADVANCED FUNCTIONS” tool. It is divided into 4 areas:
1. SECTIONS
Are the same as described on the main page.
2. REAL TIME STATUS
Reports a list of operating parameters controlled and monitored in real time.
3. PARAMETERS
Reports the list of the conigurable parameters of network.
4. TOOLS
The modiications are applied by pressing the button “Apply Network Settings”.
< DEVICE NAME > - Ethernet Interface
http://< IP Address >
USER : < username >
Device Info Printer Settings Network Setup E-mail Setup Printer Support Login...
Network Setup
IP Address:
Subnet Mask:
Default Gateway:
Printer Port:
MAC Address:
<IP address>
<Subnet mask>
<Default gateway>
<Printer port>
00-0E-E2-00-01-02
Warning!: any changes to network parameters will interrupt browser
connection! If the server not responding you MUST reconnect to the
new IP address set.
Apply Network Settings
RealTime Status
Cover Open
Paper End
Near Paper End
Paper rolling
Autoload Paper
LF key pressed
Over temperature Error
Supply Voltage error
Cutter error
OnOff Key Pressed
Paper Jam
Notch Position Error
Notch Position OK
4
3
2
1
108