Custom Audio Electronics VK80, User Manual

Page: 99 / 116

CUSTOM/POS emulation
To deine the alignment point you need to set the device parameters that compose the numerical value of the “Notch Dis
-
tance” parameter (see paragraph 6.4).
For example, to set a notch distance of 15mm between the notch and the alignment point, the parameters must be set on
the following values:
Notch Distance Sign
: +
Notch Distance [mm x 10]
: 1
Notch Distance [mm x 1]
: 5
The “Notch Distance” parameter, may be modiied as follows:
• during the setup procedure of the device (see chapter 5)
• by using the 0x1D 0xE7 command (for more details, refer to the Commands Manual)
• by driver.
99