Custom Audio Electronics VK80, User Manual

Page: 100 / 116

11.4 Printing area
In order to print ticket containing only one black mark and to not overlay printing to a black mark (that will make it useless
for the next alignment), it is important to well calibrate the height of the printing area of ticket according to the inter-notch
distance.
The following igure shows an example of tickets with “Notch Distance” set to 0:
A A
L
D H
PRINTED
AREA
PRINTING DIRECTION
Cutting line
Printing
line
Cutting line
Printing
line
A “Non-printable area” = “Distance between cutter/printing head” = 18.7mm (ixed distance)
H Distance between the irst and the last print line, called “Height of the printing area”.
L Distance between an edge of the black mark and the next one, called “Inter-notch distance”.
D Automatic feed for alignment at the next black mark.
To use all the black marks on the paper, you must comply with the following equation:
H + A ≤ L
The height of the printing area (H) can be increased to make no progress on alignment (D = 0) but no further.
100