$0F
[Name]
Set CRLF mode.
[Format] ASCII
-
Hex
0F
Decimal
15
[Description]
Inhibits the command $0D maintaining enabled only the command $0A for printing.
[Notes]
• To disable this option, reset the printer.
• This command clears the line buffer.
• On switching on the default value is in the Option Register.
[Default]
Setting in the option register by means of the front keys.
[Reference] $0D
[Example]
$11
[Name]
Graphic mode.
[Format] ASCII
-
Hex
11
Decimal
17
[Description]
Enables graphic mode:
a line in 24 column mode corresponds to 144 horizontal dots divided into 24 blocks of 6
dots each; a line in 40 column mode corresponds to 240 horizontal dots divided into 40
blocks of 6 dots each.
[Notes]
To obtain graphic printing, enter the command $11 at the beginning of each line. The
format of the byte in graphic confi guration is:
X
R
P6
P5
P4
P3
P2
P1
D7
D6
D5
D4
D3
D2
D1
D0
where:
X
is not used (0 is recommended);
R
must
be
fi xed at level 1;
P1,..P6
are the graphic dot data (1 prints, 0 does not print).
The P6 bit of the string of dots transmitted is printed on the left and the
others follow from left to right (P5, P4, P3, P2, P1) as shown:
1st byte è
►
2nd byte è
►
3rd byte è
►
P6 P5 P4 P3 P2 P1
P6 P5 P4 P3 P2 P1
P6 P5 P4 P3 P2 P1
[Default]
[Reference]
[Example]
To print a line of dots, transmit:
$11, n x $7F (where n is the number of characters per line), $0D.
To print an empty line, transmit:
$11, $40, $0D.
3. PRINTER FUNCTIONS
User Manual
PLUS II 3-5
Summary of Contents for Plus II
