Custom Audio Electronics KUBE 120, User Manual

Page: 75 / 92

11.3 Embedded Web Server: access
To enter the Embedded Web Server, type the IP address assigned to the device into Web browser. To know the IP address
of the device, print the Set-up report of the device (see chapter 5) or use “Locator”. For example, if IP address of the device
is 192.168.10.37, type in the Web browser:
http://192.168.10.37
On the screen will appear the internal default page that corresponds to the section “Device Info” The home page is divided
into 6 areas whose functions are dribed below:
1. SECTIONS:
The web server has three sections listed within each web page. These sections are:
Device Info, Printer Settings, Printer Support.
2. CURRENT PAGE
Reports section currently displayed.
3. TOOLS
Lists the tools available within the chosen section.
4. PRINTER PICTURE
Displays a picture representative of the device operational status. The picture changes
depending on the parameters reported in area number 5.
5. REAL TIME STATUS
Report a list of operating parameters controlled and monitored in real time (with a regular
refresh from 5 to 15sec).
6. TIME AND DATE
Displays the current time and date.
Model Information
Printer Parameter
RealTime Status
Network Settings
Advanced Status
Web Site
DEVICE INFO
< Device name >
< PR
INT
ER
>
< PR
INT
ER
>
Cover Open
Cover Open
Paper End
Near Paper End
Paper rolling
Paper End
Ticket Out
LF key pressed
FF key pressed
S1 key pressed
S2 key pressed
Over temperature
Supply Voltage error
Cutter error
Cutter Open
Memories Error
Paper Jam
Notch Search...
Notch Error
DEVICE INFO │ PRINTER SETTINGS │ PRINTER SUPPORT
12:00 01-01-14
4
2
1
6
3
5
75