Custom Audio Electronics KPM302III, User Manual

Page: 102 / 188

For example, to set a positive black mark distance value of 15 mm, modify the parameters
as follows:
Black mark distance sign = +
Black mark distance [mm x 10] = 1
Black mark distance [mm x 1] = 5
Black mark distance [mm x .1] = 0
If the “Black mark position” parameter is set on "Disabled" value, this parameter has no
efect on device coniguration and it is not printed on setup report.
BLACK MARK
MIN. WIDTH This parameter set the minimum length of the black mark in order to avoid that other
graphics present on the ticket can be detected as a black mark.
0 mm D 6 mm 12 mm 18 mm
1 mm 7 mm 13 mm 19 mm
2 mm 8 mm 14 mm 20 mm
3 mm 9 mm 15 mm
4 mm 10 mm 16 mm
5 mm 11 mm 17 mm
If the “Black mark position” parameter is set on "Disabled" value, this parameter has no
efect on device coniguration and it is not printed on setup report.
102