Custom Audio Electronics KPM302III, User Manual

Page: 104 / 188

6.10 Calendar clock
The device is equipped with a Real Time Clock. During power-up, held down the LF LINE FEED key to enter in the device
coniguration mode. Press the S1 key to enter in the clock coniguration (see following igure).
Press the LF LINE FEED key to modify date/time; the device will print the updated date and time.
Follow the instructions printed on the paper for the key functionality. The highlighted digit (the number is written in negative
mode) indicates the digit to be modiied. Press the LF LINE FEED key to modify the value of the highlighted digit; every
single LF LINE FEED key pressure increases of 1 his value. Once the value 9 is reached the counting starts again from 0.
Press the FF FORM FEED key to move the cursor on the next digit; if the cursor position is on the latest digit you can
proceed to next parameter by pressing the FF FORM FEED again.
Press the S2 key to exit and terminate the setting procedure.
[LF] to modify date/time
[FF] to next field
[S2] to exit
0 1/01/20 12:00:00
0 1 /01/20 12:00:00
01/ 0 1/20 12:00:00
01/0 1 /20 12:00:00
01/01/ 2 0 12:00:00
01/01/2 0 12:00:00
01/01/20 1 2:00:00
01/01/20 1 2 :00:00
01/01/20 12: 0 0:00
01/01/20 12:0 0 :00
01/01/20 12:00: 0 0
01/01/20 12:00:0 0
Date Time Setting :
01/01/20 12:00:00
CLOCK SETUP
NOTE:
For models without Real Time Clock, data and time setting remains until the device shutdown.
104