Custom Audio Electronics KPM302III, User Manual

Page: 93 / 188

6.6 Communication parameters
The parameters marked with the symbol D are the default values.
Settings remain active even after the device has been turned of and they are stored in non-volatile memory.
RS232 BAUD RATE
Communication speed of the serial interface.
115200 D 9600
57600 4800
38400 2400
19200 1200
This parameter is valid only with serial interface.
RS232 DATA LENGTH
Number of bit used for characters encoding.
7 bits/car
8 bits/car
D
This parameter is valid only with serial interface.
RS232 PARITY
Bit for the parity control of the serial interface.
None D = parity bit omitted
Even = even value for parity bit
Odd
= odd value for parity bit
This parameter is valid only with serial interface.
RS232 HANDSHAKING Handshaking.
XON/XOFF D = software handshaking
Hardware = hardware handshaking (CTS/RTS)
This parameter is valid only with serial interface.
BUSY CONDITION Activation mode for busy signal:
Oline/RXFull = busy signal is activated when the device is both in Oline status and
the bufer is full
RXFull D
= busy signal is activated when the bufer is full
This parameter is valid only with serial interface.
USB CLASS
USB communication class deinition.
Printer D = setting the printer function
Virtual COM = setting the USB port as a virtual serial port
Mass Storage = setting the sharing mode from Mass Storage
To use the value "Virtual COM", it is necessary to install an additional driver (see para-
graph 4.7 )
93