Custo Med Ergometer custo ec5000, Operating Manual

Page: 20 / 66

20
1
1 2
1
2
Ergometer custo ec5000 | EXT 0001 – DK 1585 | Version 001 – 2015-11-13
Note
• Press the [ Saddle ] or the key to enable the adjust-
ment of the saddle: the adjustment keys will be displayed
(or via the
and buttons on the control
terminal).
H
ANDLEBAR
A
DJUSTMENT
Set the handlebar to a position where it is comfortable to
reach while sitting upright.
Fold up the clamping lever to unlock the handlebar.
When the handlebar is in the correct position, fold down
the clamping lever to lock the handlebar and check that
the lever is tightened.
With the ergometer standing fi rmly, check that the handle-
bar is tight. Adjust the clamping force of the clamping
lever if necessary.
Adjust the clamping force by opening the clamping lever
and turning the setting screw clockwise about a quarter
revolution with a fl at-blade screwdriver. Then check the
clamping force. Repeat these steps if necessary. When the
clamping force is appropriate, lock the clamping lever by
folding it down.
The handlebar is not designed to support the full body
weight.
Optionally, the height of the handlebar can be adjusted by
means of a motor, that is controlled via the toggle switch
on the handlebar.
S
ADDLE
A
DJUSTMENT
On the diff erent ergometer models, the saddle height is
adjusted in diff erent ways:
- with a clamping lever (mechanical)
- with a gas pressure spring
- with a motor.
When adjusting the height at the display, press the
[ Saddle ] key fi rst. Then press the appropriate arrow key
on the right to raise or lower the saddle.
S
ADDLE ADJUSTMENT
AT THE CONTROL TERMINAL
1 Saddle up
2 Saddle down
H
ANDLEBAR ADJUSTMENT
1 Clamping lever
T
OGGLE SWITCH FOR ADJUSTING THE HEIGHT OF THE HANDLEBAR
S
ADDLE ADJUSTMENT AT THE DISPLAY
1 Saddle up
2 Saddle down
Saddle
0
Note
• Lock the clamping levers only as tight as necessary, NOT
with maximum force.
• Lubricate the thread of the saddle clamping lever periodi-
cally with a suitable lubricant (e.g., OKS470).