Cushman COMMANDER 2200, Owner'S Manual And Service Manual

Page: 28 / 68

OPERATION AND SERVICE INFORMATION
Page 12
Owner’s Manual and Service Guide
Read all of Manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings
Fig. 17 Neutral Lock
the pin will s nap into the hole in the direc tion selector
mounting bracket preventing any movement. When in
this position, the direction selector remains locked in the
neutral position. To unlock the direction selector, pull the
neutral lock pin handle out and rotate until the po inted
portion of the h andle fits into the hole in th e direction
selector cam.
HAULING
To reduce the possibility of severe injury or
death while transporting vehicle:
Secure the vehicle and contents.
Never ride on vehicle being transported.
Always remove windshield before transport-
ing.
Maximum speed with sun top installed is 50
mph (80 kph).
If the vehicle is to be transported at highway speeds, the
sun top must be r emoved and the seat bottom secured.
When transporting vehicle below highway speeds, check
for tightness of hardware and cracks in sun top at mount-
ing points. Always remove windshield when transporting.
Always check that the vehicle and contents are ade-
quately secured before transporting. The rated capacity
of the trailer or truck must exceed the weight of the vehi-
cle (see GENERAL SPECIFICATIONS for vehicle
weight) and load. Lock the park brake and secure the
vehicle using ratchet tie downs.
2
1
3
Hole in Direction
Selector Cam
Unlocked