Curtiss-Wright D51615-202 Series Manual Download Page 72

Page: 72 / 127

Mar 2017

Page 56

means without prior permission in writing from the copyright owner.

DATA ACQUISITION FLIGHT RECORDER Type D51615-202-XXX or D51615-

202-XXX-090- with CCU Type D51616-XXXX and CAM Type D51623-XXXX

Installation and Operating Manual with Illustrated Parts

List

Commercial in Confidence

PIM434-I

(10) Switch off power to the DAFR. Disconnect the MTI cable.

DAFR File Conversion Process – PGS Release 5.1.1 or
earlier

(1) Copy the FDRConvert.exe file to the required folder.

(2) Open Windows Explorer and navigate to the directory

containing the DAFR FDR data files to be converted.

(3) Drag and drop the file for conversion on to the

“FDRConvert.exe” program icon; located on the desktop

or elsewhere. The program will start and output similar
to the following:

(4) The FDRConvert tool will check the validity of the file

name and terminate if:

(a) The Input File does not exist.

(b) The Input File is of the wrong format.

NOTE: If the Output File to be created already exists,

the existing file is automatically deleted.

Progress whilst creating the Output File is
shown in the DOS window. On successful

completion, a “Conversion Complete” message
will be displayed and the Output File will have

been created.

FDR Data Analysis

This procedure may be performed on the download PC or on a

desktop PC on to which the recovered data has been copied.
It is assumed that a database with appropriate parameter

definitions has been defined and PGS has been set up
correctly. Refer to the PGS Operators Manual for more

details.

Summary of Contents for D51615-202 Series
































































































































Search results

Summary of Contents for D51615-202 Series

Reviews:

Related manuals for D51615-202 Series

Brands by name

Popular brands

Curtiss-Wright D51615-202 Series, Manual

Search results

Summary of Contents for D51615-202 Series

Reviews:

Related manuals for D51615-202 Series

Brands by name

Popular brands