6
7
2. INSTALLATION
The Model FP-10 Dimensions (mm):
SEE NOTE 5
128.5
50.0
SEE NOTE 8
0.0
104.0
123.0
Ø8.5
80.0
40.0
66.5
0.5
+
8.5+
0.5
0.0
NOTES:
1. Materials:
Case, Cover & Pedal: Glass Filled PA66;
Shaft: Stainless Steel.
2. Cable: #18AWG, 9 Wires, PVC Jacket, UL 80 C,
300V Rated.
3. Pedal Travel: 30˚ ±3˚.
4. Weight: 1Kg Max.
5. The Pedal can be mounted on either side of the
shaft at any angle. Maximum tightening torque not to
exceed 7.8 Nm (70 in-lbs)
6. For safety, a mechanical stop between the angular
position of 26
°
and 30
°
of travel should be used, if a
maximum normal force of 23 kgf (50 lbf.) is going to
be applied to the pedal during operation.
7. Spring switch can be used to detect failure of the pedal
return springs. Check for the possibility of spring failure
if the switch is open and/or pedal resistance force is
reduced by 50%.
8. Recommended mounting hardware: M8 or 5/16.
Recommended torque: 2.7 Nm (24 in-lbs).