![background image](http://html1.mh-extra.com/html/curtis/expr10/expr10_user-manual_2699632013.webp)
Programming Options
4FFUIFmSTUQBHFPGUIF
PROGRAMMING GUIDE
for instructions on how to access the programming menu.
To exit programming mode, press
Ź
until “Exit” appears on the display, then press .
Manual Dispense -
All buttons are set to Manual Dispense mode at the factory. The Manual Dispense
QSPHSBNNJOHPQUJPOJTVTFEUPTFUCVUUPOTUIBUBSFTFUUP%JTQFOTF#Z5JNF TFFCFMPXCBDLUP.BOVBM
Dispense mode. Press
~
to access, then press the button to be set to Manual Dispense. The display will
return to the Manual Dispense menu. Repeat the process to set other buttons, if desired, or press
Ź
to go to
the next menu.
Dispense by Time -
sets the unit to dispense the amount of product by time rather than holding the button
down until the desired amount is dispensed.
Press
~
to access. Press the button to be set to Dispense By Time (Manual Dispense will be disabled for that
CVUUPO1SFTT
Ź
UPTFUUIFEJTQFOTFUJNF JOTFDPOET1SFTT
~
UPTBWFUIFTFUUJOH3FQFBUUIFQSPDFTTUP
set other buttons, if desired, or press
Ź
to go to the next menu.
Temperature -
TFUTUIFUFNQFSBUVSFPGUIFXBUFSIFMEJOUIFXBUFSUBOL5IFSBOHFJT¡' ¡$UP¡'
¡$5IFSFDPNNFOEFEUFNQFSBUVSFJT¡' ¡$1SFTT
~
to access. Press
Ż
PS
Ź
to change
the temperature. Then press
~
UPTBWFBOEFYJU1SFTT
Ź
to
continue to the next menu.
Powder % Ratio -
sets the ratio of product powder dispensed
GSPNFBDIDBOJTUFS TFFEJBHSBNGPSBQBSUJDVMBSCVUUPO5IF
SBOHFJTGSPNUP HSBNTQFS1SFTT
~
to
access. Press the button for which the powder ratios need to be
DIBOHFEi3BUJP"wXJMMBQQFBSPOUIFEJTQMBZ1SFTT
Ż
PS
Ź
to increase or decrease the ratio, then press
~
to
TBWFUIFTFUUJOHGPSDBOJTUFS"
Repeat the process for canisters B through E. After you set
DBOJTUFS&UIFEJTQMBZXJMMSFUVSOUPUIF1PXEFS3BUJPNFOV
Repeat the entire process to set other buttons, if desired, or
press
Ź
to go to the next menu.
Service Call -
TFUTUIFTFSWJDFQIPOFOVNCFSUIBUBQQFBSTPO
UIFEJTQMBZXIFOUIF6$.EFUFDUTB4&/403&3303PS8"5&3
LEVEL ERROR. Press
~
to access. Press
Ż
or
Ź
to choose
the number to be changed. Then press
~
repeatedly to change
UIFOVNCFSWBMVF1SFTT
Ż
or
Ź
to choose the next number to
change or choose “Ex” and press
~
to exit. Press
Ź
to go to the
next menu.
Banner Name -
changes the banner name that appears on the display (the factory default is
CURTIS
/P
banner name appears when all blanks are entered. Press
~
to access. Press
Ż
or
Ź
to choose the letter to
change. Then press
~
repeatedly to change the letter. Press
Ż
or
Ź
to choose the next letter to change or
choose “Ex” and press
~
to exit. Press
Ź
to continue to the next menu.
PROGRAMMING GUIDE
PG13
&913130(3"..*/((6*%&ø
/$
IMPORTANT:
8IFOTFUUJOHBCVUUPOUPEJTQFOTFCZUJNFUPBWPJEHVFTTJOHUIFBNPVOUPGUJNFSFRVJSFEUP
mMMUIFDVQVTFBTUPQXBUDIUPEFUFSNJOFUIFUJNFSFRVJSFEVTJOH.BOVBM%JTQFOTFNPEF
Canister Layout
(behind front access door)
A
B
C
D
E