7
CAUTIONS and WARNINGS
Read and thoroughly understand the Cautions and Warnings contained throughout this
manual, on the machine and on the Formulation manufacturer's label. Failure to comply with
all Cautions and Warnings could result in severe bodily injury or death.
¾
Never operate the machine with the Atomizer Guards removed and always wear safety goggles
when standing near the machine. Do not stand directly to the side of or in front of the atomizer
during operation. The atomizer rotates at high speed. In the event of breakage, atomizer
components can produce high forces that can cause severe damage.
¾
Periodically inspect the atomizer sleeve for signs of fracturing or loosening. If an audible change
is detected or if you notice a difference in vibration during operation, shutoff the machine
immediately. Changes in sound and vibration are signs of loosening or fractured components!
¾
Keep all loose articles of clothing, jewelry, hair, etc… away from Blower Housing and Atomizer.
¾
Do not operate machine in enclosed areas for a period longer than the formulation label allows.
¾
Route all electrical connections safely away from sharp edges and flammable materials that could
ignite if wires were cut and produced sparks. Protect the outside wire casing from sharp edges
(sheet metal, etc…) when routing the electrical wires through the vehicle to prevent an accidental
short circuit.
¾
Always mount the machine securely to the bed of the vehicle as described in this manual.
¾
Always wear OSHA approved protective clothing, gloves, safety glasses and respirator when
handling formulations to be sprayed with this machine.
¾
Understand any dangers of the formulation being used and what to do in case of an accident
involving the formulation.
¾
Make sure battery connections are tight. Loose connections will cause poor performance and
could cause overheating of the machines electrical system.
Summary of Contents for DYNA-FOG DYNA-JET L30 2 Series
