![background image](http://html1.mh-extra.com/html/curtis/cfb1/cfb1_service-manual_2699110007.webp)
Page 7
Service Manual - Frozen Beverage Dispenser
Remove the Mixing Bowls and Lids
7. Remove the handle assembly from the bowl tap by pushing in on the top of the handle with
your thumb while pulling up on the bottom with your index finger.
8. Disconnect the lid light plugs from the sockets behind the mixing bowl. Make sure that the
plugs do not come into contact with liquids while removed. Lift off the lids.
9. Raise the front part of each bowl to release. Remove each bowl from its seat by pushing and
tapping lightly on the rear.
Clean the Mixing Bowl Parts
10. Pull forward on each auger to remove it from the evaporator. Remove the auger seal (A).
11. Pull the bowl seal (B) off of the back of the bowl.
12. Pull the bottom part of the lids free from the top parts.
13. Soak the bottom part of the lids, removed in step 12, and the tap parts and auger in detergent solution and scrub with a soft
cloth. Rinse in fresh water.
14. To clean the top portions (lighted part) of the lids, use a clean, damp cloth soaked with detergent solution. Using a clean, damp
cloth, wipe clean the outside portion of the lid top. Wipe with a clean, damp cloth soaked in fresh water.
15. Clean the mixing bowls and evaporators with a clean damp cloth soaked with detergent solution. Wipe with a clean, damp cloth
soaked in fresh water.
continued...
9
8
7
10
11
12
CAUTION:
To prevent damage, DO
NOT immerse the top portion of
the lid in fluids of any kind.