Page 6
Wilbur Curtis Co., Inc.
WARNING:
•
To avoid personal injury, disconnect the power cord before cleaning. Wear protective glasses and
gloves.
•
Never spray water on the unit to clean it.
•
Do not use cleaning liquids, compounds or powders containing chlorine (bleach), solvents,
scouring
powder,
flammable materials or corrosives. These products promote corrosion and will damage the
surfaces. USE OF THESE PRODUCTS WILL VOID THE WARRANTY.
•
DO NOT immerse the unit or parts in water or any other liquid, unless specifically instructed to do so.
Do not wash any of the components in a dishwasher. Hand or air dry the parts only.
CLEANING
Daily Cleaning
Clean and sanitize all of the bowl assemblies at least once a day according to the following steps. These operations may need to
be performed more frequently based on the mix used. Contact the concentrate/mix supplier for more details. If the machine is not
used continuously throughout the day, wipe the tap areas with a clean cloth and sanitizing fluid. If the dispenser has not been used
for a long period of time, clean the unit before returning it to use.
1. For cleaning, prepare a mild solution of detergent and warm water.
Empty the Drip Trays
The drip trays should be emptied and cleaned every day and drained every time the red full indicator pops up. They must also be
removed before emptying the bowl.
2. Lift each drip tray up and out.
3. Wash the trays and grills with the detergent solution. Hand dry all of the components, then reinstall the grills. Set the trays aside
and reinstall at the end of the daily cleaning process.
Empty the Bowl
Empty each bowl before cleaning (if already empty, skip to step 7).
4. Place a large empty container under each dispenser tap.
5. Turn the main power switch to the ON (
|
) position. Turn the mixing switches to
the ON (
|
) and the refrigeration switches to the OFF (O) position. Pull out on each
dispenser lever to drain the contents out of each bowl.
NOTE:
If the beverage
mixture is not frozen, hold the container up to the bottom of the tap to reduce
splashing.
6. Once the bowls are empty, switch the main power switch OFF (O).
Unplug the
power cord from the electrical outlet.
2
Full indicator
5
4