![background image](http://html1.mh-extra.com/html/curtis/2876196-067/2876196-067_installation-and-owners-manual_2699100002.webp)
DESIGN CONCEPT
Curtis Cabs feature an assembly of parts designed for your vehicle which require adjustment
and alignment of components to accommodate vehicle variations and provide proper weather
protection. For accurate installation, proper operation, and years of satisfaction, please read
and understand the installation instructions.
From all of us at Curtis, we thank you for choosing our product.
GENERAL INFORMATION
Helpful Reminders:
A. Refer to parts diagram to help identify parts during assembly process.
B. Leave all bolts loose for later adjustment unless otherwise specified.
C. Read and understand all instructions before beginning.
D. Apply a clear silicone sealant to seal any minor gaps that may occur due
to vehicle variations.
driver and passenger.
Curtis accessory weights are listed in product
add additional weight to the base vehicle. All
Curtis Cabs, blades and general accessories
ADDED
WEIGHT
brochures. Deduct the accessory's total weight
from the vehicle's rated capacity and never
exceed the vehicle's rated capacity including
Exposure to Carbon Monoxide can
Cause illness, serious injury or death.
Never operate vehicle if suspicious of
Carbon Monoxide. Inspect exhaust system for leaks monthly.
Leaks can result from loose connections, corrosion, cracks or
other damage to the exhaust manifold. If leaks are found, repair
or replace exhaust system. Do not use vehicle until repair or
replacement is complete.
Rev. K, p. 2 of 11
TOOLS REQUIRED:
1/4” & 3/8” DRIVE RATCHETS
3/8” DEEP SOCKET (3/8” DRIVE)
1/2” SOCKET (3/8” DRIVE)
10mm SOCKET (3/8” DRIVE)
5/32” AND 3/16” ALLEN WRENCHES
HAND DRILL
#2 PHILLIPS HEAD BIT TO USE IN DRILL
#2 and #3 PHILLIPS HEAD SCREWDRIVERS
T27 TORX BIT
BAR CLAMP
Curtis Customer Service Hotline
1-800-343-7676 (ext. 1)
DO NOT TRAVEL WITH WIND-
SHIELD IN FULL OPEN POSITION.