13
/16
System Operation Manual - Peak, Peak DS, Sumo, Tekoa
10/29/14
The display and control
pad
The display serves both as a cyclecomputer,
displaying speed and distance information,
and as an interface to the bike’s electrical
system. The functions of the display are
controlled by the control pad.
The display’s cyclecomputer
functions
The display has four cyclecomputer
functions. Switch between these functions
using the button. The function’s information
is displayed in the main display area.
CYCLECOMPUTER FUNCTIONS
SPD
Speed
The bicycle’s
current speed
ODO
Odometer
The bicycle’s total
mileage
DST
Trip
distance
The distance
covered during the
current trip
Range
Remaining
range
The estimated
remaining range
before the battery
is empty
Distance and range are displayed in the
units shown to the right of the main display
area
.
To reset the trip distance counter, hold
and
and
on the control pad together
for 10 seconds.
To reset the odometer, hold
and
and
on the control pad together for 60
seconds.
The display’s electrical system
functions
The display shows information about the
bike’s electric assist, and gives the rider
access to several important functions:
Assist level
The current assist level is shown on the
display (assist level indicator).
Battery level
The battery level indicator shows the
current charge level of the battery. Each
bar represents about 20% capacity.
The low battery warning indicator
lights up
when the battery has
less than 5%
remaining
charge.
Maintenance information
The maintenance indicator
lights up when
there is a system error. An error code shown
on the display helps to diagnose the problem.
See “Error codes” below.