15
/16
System Operation Manual - Peak, Peak DS, Sumo, Tekoa
10/29/14
SYSTEM ERROR CODES
Solution:
Ask your dealer to check the function of your throttle. The throttle connection
may be loose, or the throttle itself may need service.
Charging issues
ISSUE:
Charger LED indicator flashes red
LED flashes red after charging for a while:
Battery is not responding to charging.
• The battery voltage is less than 25V, and does not rise above 25V after 30 minutes
of charging.
• The battery voltage is between 25V and 30V, and does not rise above 30V after one
hour of charging.
Solution
Reset charging by unplugging the charger from the wall outlet, then
plugging it back in. If charging fails after a second attempt, the battery
or charger may need to be replaced. Bring them to your dealer for
inspection.
Battery has not finished charging after 10 hours.
Solution
The battery may be damaged and should be inspected by your dealer.
LED flashes red immediately after being plugged in:
The polarity between the charger and battery does not match.
Solution
The battery or charger may be damaged. Stop using the battery and
charger immediately, and bring them to your dealer for inspection.
The output of the charger is short-circuited.
Solution
Stop using the battery and charger immediately. Check for obvious
external shorts on the charging plug and battery charging port. If no
obvious short exists, the battery or charger may be damaged. Bring
them to your dealer for inspection.
Other issues causing a flashing red LED:
The temperature of the battery is too high to charge.
Solution
Put the battery and charger in a cool place, then try charging again
after a few minutes.
