![background image](http://html.mh-extra.com/html/dans-comp/front-load-stem/front-load-stem_installation-manual_504681001.webp)
Front Load Stem Installation
These instructions are to be used as a guide only. Improperly installed parts may lead to severe injury or harm. We strongly recommend that
a properly trained bike mechanic handle all installations, adjustments and repairs on your bike. As always...Ride Safe!
AMain.com Inc.
1-
844-970-4269
www.danscomp.com
Page
1
Tools Needed
•
Grease
•
Allen Wrench
•
Open/Closed end wrench
•
Adjustable wrench
Note: Tools needed will vary depending on the style of headset
compression cap and bolt being used.
Removing the Handlebars
•
Loosen and remove the clamping bolts holding the face plate
on the top of the stem.
•
Lay the handlebars on a workbench or on the floor away from
the bike so that they are not in the way.
Removing the old stem
•
Loosen the pinch bolts that are holding the stem tight, but do
not remove them.