Cuppone Giotto GT110, Pre-Installation And Installation Manual

Page: 17 / 42

Ed. 05421 - 70702561 - REV04 - valid from serial number 21052570 - Giotto - Installation
17
A
Fig. 8. Fig. 9.
Installation
Preliminary operations
Fig. 8.
Carefully remove the protective film.
If any glue residue is left on the surfaces, remove it with soapy
water but without any corrosive or abrasive products or sharp
or pointed instruments.
Check that all the parts making up the oven are in
good condition and without any faults or breakages, if
that is not the case, contact the retailer for the proce-
dures to follow.
Fig. 9.
Install the collar
A
on the oven gas flue using the three
screws provided.
Packaging disposal
Before starting to install the oven, dispose of the packaging in
accordance with the regulations in force in the country of in-
stallation.
Caution, suffocation hazard! If left unattended, packag-
ing could be potentially dangerous for both children
and animals.
Caution, hindrance hazard! If left unattended, packag-
ing could hinder vehicles and installers during assem-
bly operations.