CUOGHI mini NEB F3005, Instructions Manual, Page: 8 / 16

8 M869-4_GB_letter
mini NEB
ENGLISH
Pic. 8).
Pic. 7 - Drain hose placement
WARNING! Any failure in the drainage can cause water
dripping from the humidifi er.
3.5 Installation
Th e Cuoghi Mini NEB humidifi er can be installed in one of two
ways: Mounting on the side of a wall or Hanging from a ceiling.
Hardware for both is provided with your humidifi er
3.5.1 Wall installation
Pic. 8 - Wall mounting bracket and holes on the wall
Use the supplied metal bracket with screws to install the humidi-
fi er to a wall (see Pic. 9). Use the bracket as a template in order
to determine screw placement.
»
Drill three 1/4” diameter holes as in Pic. 9.
»
Insert screw anchors into holes. Fasten bracket to the wall
and confi rm mounting is solid.
» Loosely attach bracket to rear of Cuoghi Mini NEB using
the four included screws.
»
Once installation is confi rmed to be solid and secure, tighten
four screws attaching bracket to rear of humidifi er.
IMPORTANT:
 Observe minimal distances in Par 3.2 when wall
mounting the Cuoghi Mini NEB.
 Make sure bracket is completely horizontal before
drilling holes.
 Be certain the wall is able to sustain the weight of the
humidifi er (10.9 lbs). If drilling through drywall, it is
highly recommended to screw into the studs behind the
wall or to use wall anchors
3.5.2 Ceiling installation
Use the three supplied hooks along with chain (not included) to
hang the Cuoghi Mini NEB humidifi er from the ceiling.
Pic. 9 - Hooks
»
Observe minimal distances in Par 3.2 when hanging the
Cuoghi Mini NEB.
»
Predetermine where the three support chains will be at-
tached to the ceiling in order to keep the chains as vertical
as possible.
»
Choose a chain material that can both sustain the weight
of the humidifi er as well as to not be adversely aff ected by
humidity.
» Attach the three supplied hooks to the bottom of the Cuoghi
Mini NEB.