36
TARGET BIN SCALE RF rev.09
TARGET BIN SCALE RF
Top View
Concrete slab must be flat and
leveled. The system will only
work if all leg supports are at
the same level!
13. ANNEX A – LOAD CELL INSTALLATION
Mounting holes are 16” apart, for 1/2”
dia. threaded rod or bolt, grade 5 or
higher
All load cells must be
placed inside the circle
made by the legs of the
bin.
3/4”-16 UNF 2 1/4”
grade 8 bolt (sup-
plied)
Metal plate
1/2” x 5” x 8”
The washers provided
with the support must
be installed between
the bin leg and the
load cell.
Ground strap
bolted to the bin leg.
The bin leg should never touch the load cell, it
must rest on the washers!
5
TARGET BIN SCALE RF rev.09
TARGET BIN SCALE RF
2.
SYSTEM OVERVIEW
2.1. Description of the Con-
troller
The TARGET BIN SCALE RF is an electronic
device which weighs and distributes feed in
livestock buildings. With this system, each
bin is mounted on load bars. This way, the
controller always knows what is the exact
amount of feed remaining in each bin. The
controller also refers to the bin weight to
distribute precise feed rations to the birds.
In all, the TARGET BIN SCALE RF has 8 out-
puts to control up to 4 bin augers and 6 feed
line motors. It also comes with 16 time clocks
made of 12 cycles each.
