32
TARGET BIN SCALE RF rev.09
TARGET BIN SCALE RF
TRANSFER ERROR
The controller will not warn you if
the transfer is incorrect. Respect
the following rules to make sure
the transfer works properly:
1. Make sure the card switch is
at the unlocked position before
transferring a configuration on
the card.
2. Do not move or hold the card
while a transfer is ongoing.
9
TARGET BIN SCALE RF rev.09
TARGET BIN SCALE RF
5.
CONTROLLER SETUP
5.1. Setting the Time & Date
1. From the main menu, select:
» 6. Time and Date
6. Date & Time
Date: 200X/12/31
Time: 12:00:00 PM
2. Press the right-arrow. The year starts
flashing on the display.
3. Use the adjustment buttons to set the
year. Note that the date format may vary
depending on the controller configuration.
4. Press the right-arrow key. The month
flashes on the display. Use the adjustment
buttons to set the month.
5. Press the right-arrow key. The day flashes
on the display. Use the adjustment buttons
to set the day.
6. Press the right-arrow key. The hour
flashes on the display. Use the adjustment
buttons to set the hour.
7. Proceed in similar fashion to set the min-
utes and seconds.
8. Press the left-arrow as many times as
required to exit from this menu.
5.2. Password
For security reasons, a password is required
to access the installation mode. The pass-
word is made up of three blocks of two digit.
By default, the installer password is set to
03 05 14 and cannot be changed.
1. From the main menu, select:
» 8. Password
8. Password
Current user:
User 1
2. Press the right-arrow key again. The
first two digits of the password flash on the
display.
8. Password
Enter password:
00 ** **
3. Use the adjustment buttons to set the
first two digits of the password then press
the right-arrow key.
4. Proceed the same way to set the second
and third two digits. Press the right-arrow
key to validate the password. The message
"Wrong Password"
is displayed when an
invalid password is entered.
5. Press the left-arrow as many times as
required to exit from this menu.
