Cumberland PNEG-499, Installation And Operation Manual

Page: 8 / 64

2. Safety
8 PNEG-499 Cycle Plus Pan Feeder
READ THESE INSTRUCTIONS BEFORE OPERATION AND SERVICE
SAVE FOR FUTURE REFERENCE
1. Read and understand the operating manual before trying to install or operate the Pan
Feeding System.
2. Power supply should be OFF for service of electrical components. Use CAUTION in checking voltage
or other procedures requiring power to be ON.
3. Never attempt to operate the Pan Feeding System by jumping or otherwise bypassing any safety
devices on the unit.
4. Keep the Pan Feeding System clean. Do not allow debris to collect around drive unit, control pan,
hoppers or boots.
5. Use CAUTION in working around the Pan Feeding System’s moving parts.
This product is intended for the use of feed handling only. Any other use is considered a misuse of
the product.
Some edges of the product’s components are sharp. Examine each product component to determine if
there are any safety considerations to be taken prior to use and/or installation. Any and all necessary
personal protective equipment should be worn at all times when handling, assembling, installing and
operation of the product and/or its components.
Throughout this manual, guards are removed for illustration purposes only. All guards must be in place
before and during operation.
For guidance or assistance on any issues relating to the safe use of Pan Feeder System,
Contact:
Cumberland
1004 E. Illinois St.
Assumption, IL. 62510
Phone: 1-217-226-4421
Operate Motor Properly
In an emergency, shut down the power source.
Turn OFF and lock out all power sources before performing
any maintenance.
Do not operate electric motor equipped units until motors are
properly grounded.
Disconnect power on electrical driven units before resetting
motor overloads.
Do not repetitively stop and start the drive in order to free a
plugged condition. Jogging the drive in this manner can damage
the equipment and/or drive components.
Electric Shock Hazard