9
Instructions For Use
A Fitting & Removing The Plates
To fit the plates:
n
Place the appliance in the open position with the controls
directly in front of you.
n
Each plate is embossed with ‘Low’ or ‘Up’. Select the ‘Low’
plate, hold it flat with the positioning guides facing away from
you and the ‘Low’ embossed sign facing up.
n
Align the two positioning guides to the back of the plate with
the brackets on the bottom of the appliance housing base.
Tilt the back of the plate and slide it underneath the brackets.
Push down the front end of the plate until it locks into place.
n
Select the ‘Up’ plate and with the ‘Up’ embossed sign facing
up and the two positioning guides facing away and down.
Align the plate with the brackets on the underside of the lid of
the product and push down the front to the locked position.
Positioning guides
