Cuisinart DGB900BCU Grind & Brew Plus, Instruction Manual

Page: 13 / 24

13
Removing and Replacing the Bean Hopper
• The hopper can be completely removed by lifting the hopper lid and turning the hopper
release knob to the unlock position (see picture below). This is ideal for filling and
cleaning.
1
2
1. Bean Hopper release knob
2. Bean Hopper
3. Bean Hopper Lid
3
WARNING!
Take care not to spill water into the grinding chamber while the hopper and
lid are not in place. In the event that some water spills in to the chamber, dry thoroughly
before use.
• To replace the hopper, place in position and turn the hopper release button to the lock
position. Replace the hopper lid.
•
N.B.
if the hopper lid is not locked in place, the appliance will not operate. If you try
and turn the unit on whilst the hoper is not locked in place, the appliance will beep
continuously
Using pre-ground beans
• You can use pre-ground beans with this appliance. With the scoop provided we
recommend using 1 level scoop of ground coffee per cup. The maximum capacity for
ground coffee is 16 cups. Exceeding this may cause the appliance to overflow.
N.B.
Be careful to add only the amount of coffee for the number of cups you wish to
brew. The machine will use all of the coffee regardless of the amount of water used.
• To add coffee, press the filter compartment release button which can be found on the
left side of the housing.
1. Filter Basket Cover
2. Gold Tone® Filter
3. Filter Basket Door
4. Filter Basket