10
B
Setting the Clock
When the unit is plugged in, the screen will show 12:00AM.
Press and hold either the ‘Hour’ or the ‘Min’ button until the numbers start to flash.
Then press the ‘Hour’ and ‘Min’ buttons to scroll through the numbers. When the
numbers stop flashing, the time has been set.
N.B.
When you go past the number 12, the letters ‘PM’ will appear to adjust the time from
12 noon to midnight. When ‘PM’ is not shown, the time indicated corresponds to the AM
hours, from 12 midnight to 12 noon. Always make sure that the time is set according the
correct period so that the programming is correct.
N.B.
The “Programme” mode cannot be entered if the machine is in a “brew” cycle.
C
Setting the Programme Time
Press and hold the ‘Programme’ button until the green indicator lights and LCD display
begin to flash, this signals that you have entered the “Set Programme Time” mode.
The desired time can be set by pressing the ‘Hour’ and ‘Min’ buttons to scroll forward
through the digits. The buttons can be held down to scroll through the digits or pressed
and released lightly to advance one digit at a time. Once the time has been selected,
press the ‘Programme’ button twice so the green indicator light is illuminated. Brewing
will begin at the programmed time.
N.B. The ‘Programme’ mode cannot be entered if the Grind & Brew Plus is in a ‘brew’ cycle.
N.B. When setting the programme time, ensure coffee and water are placed in the machine
before the automatic start (see “Preparing to Brew”)
Summary of Contents for DGB900BCU Grind & Brew Plus
Page 1: ...Grind Brew Plus DGB900BCU...
Page 23: ...23...
Page 24: ...www cuisinart co uk IB 7 369F...
