Cuisinart DGB900BCU Grind & Brew Plus, Instruction Manual

Page: 19 / 24

19
Troubleshooting
PROBLEM CAUSE SOLUTION
Continuous
beeping Bean Hopper not locked
in place (when brewing
with whole beans) • Check to see if the Bean Hopper release
knob is in the unlocked position
• Place the Bean Hopper on the unit
• Turn the knob to the locked position
• Press On/Off twice to resume; if
programming, reset
Filter door not closed • Check to be sure that all components of
the filter compartment are in place
• Close filter door (you will hear a click if
the door is properly shut)
• Press On/Off twice to resume; if
programming, reset
Filter basket not in
place • Open filter door by pressing the filter
door release button
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if
the door is properly shut)
• Press On/Off twice to resume; if
programming, reset
Filter basket cover not
in place • Open filter door by pressing the filter
door release button
• Put on cover, matching “grind” arrows
• Hook filter basket with cover onto door
• Close filter door (you will hear a click if
the door is properly shut)
• Press On/Off twice to resume; if
programming, reset
Filter Basket not
emptied of used grinds • Open filter door by pressing the filter
door release button
• Remove filter basket with cover
• Discard used grounds
• Replace filter basket with cover and
close door
• Press On/Off twice to resume; if
programming, reset