10
8. Carefully remove the chopping blade, holding it by the gripping
ridges on the plastic sheath.
NEVER TOUCH THE BLADE
ITSELF
.
9. Remove food with a spatula.
Note: Do not operate the chopper/grinder attachment without
food contents in the work bowl.
WHISKING
1. Insert the whisk attachment into the motor body. (See Assembly
for Whisk Attachment, page 7.)
2. Plug electrical cord into a wall socket.
3. Put the whisk into mixture to be blended.
4. Press and hold the desired speed button. The hand blender will
continue to run as long as the switch is pressed in. To turn hand
blender off, release the speed button and the motor will stop.
CLEANING AND MAINTENANCE
HAND BLENDER
Always clean the motor body and blending shaft thoroughly after
using. Remove the blending shaft from the motor body. Clean the
motor body only with a sponge or damp cloth. Do not use abrasive
cleaners that could scratch the surface. To clean the blending shaft,
wash by hand in hot water using mild detergent. Be mindful of the
fixed razor-sharp edges.
CHOPPER/GRINDER ATTACHMENT
To simplify cleaning, rinse the work bowl, blade and cover
immediately after use so that food won’t dry on them. Do not
submerge the work bowl cover in water or put in the dishwasher.
Wash chopping blade and work bowl in warm, soapy water. Rinse
and dry. Wipe the underside of the cover with a sponge or damp
cloth to remove any food. Wash the blade carefully. Avoid leaving it in
soapy water where it may disappear from sight.
You can wash the work bowl and chopping blade on the upper shelf
of your dishwasher. Unload the dishwasher carefully to avoid contact
with the sharp blade. Wipe the motor body and top of the cover with
a damp sponge or cloth. Dry it immediately.
Never submerge the
motor body or the cover in water or other liquids.
The chopper/
grinder attachment is intended for
HOUSEHOLD USE ONLY.
WHISK ATTACHMENT
To clean your whisk attachment, simply release the attachment
from the motor body housing. Once the whisk is removed, detach
the metal whisk from the gearbox by pulling the pieces apart. To clean
the gearbox, simply wipe with a damp cloth. To clean the metal
whisk, wash with warm soapy water or put in the dishwasher.
