C550c Operation Manual
5 System setup
120
Email settings
Use this screen to set up a connection to an email server. You will need to do this if you want to send
survey reports by email. You will also need to set up a WiFi connection to the internet; see
page 113
User Email:
Enter the email address for the account you want to use when sending emails from the
controller. The controller will use this account to connect to the email server.
Note: You will select the email recipient when you send a survey report.
Password:
Enter the password for the account you will use to send emails from the controller.
Username:
If required, enter the SMTP Username for the account you want to use when sending emails
from the controller.
Note: Some email services, including Gmail, will use the SMTP Username attribute as the sender's
address instead of the supplied User Email address.
Server
: Enter (or select) the email server you want to use.
If the controller detects a recognized email account type (eg, Outlook or Gmail), it automatically
sets the appropriate email server (smtp-mail.outlook.com or smtp.gmail.com).
Port:
If using an SMTP connection, you must enter the TCP port for email submission on your SMTP
server. The default is port 587.
Requires secure connection (TLS):
By default, the controller always sends emails over a secure
(encrypted) connection ie, over an SMTPS connection. But you can clear this check box if it is acceptable
to send survey reports over an unencrypted connection
