Cuckoo CPC-A FUZZY series, User Manual

Page: 12 / 56

❶ ❷ To disassemble the pressure steam cap, press the hooks on both sides of
the pressure steam cap cover. After hand-washing with a neutral cleaning
fluid and a sponge, reassemble them in order. Make sure that the packing
is in the right position and the right direction. Then, insert the packing into the groove.
To reassemble the pressure steam cap, put its lower
part in the right position along the groove first.
Then, push the lower part completely into the groove
in the direction of the arrow as shown in the picture.
❼
❽ ❾ If the pressure regulator is loosely
assembled with the lid, the product will
not cook properly. Please double check
whether the nut is tightly fastened.
Detach the cleaning pin attached to
the bottom of the product and clean
the drain of the steam vent pipe. After
cleaning, assemble them in reverse order.
After insert the cleaning pin into the hole
in the steam vent pipe, fasten the steam
vent cap tightly. If int is not tightened enough,
proper steam ventilation will not occur.
❹ ❺ ❻ Pull the hook part as shown in the
picture to separate the pressure
steam cap.
While pressing the steam vent pipe
as shown in the picture, loosen the
steam vent cap counterclockwise.
Separate the steam vent pipe.
How to assemble and disassemble the pressure regulator
Maintenance tips for pressure regulator
❸ ❶
Grip the pressure regulator.
❷ Hold the pressure regulator tightly
and loosen the nut counterclockwise.
Loosen the bolt at the bottom of the
pressure regulator to disassemble.
Do not touch pressure steam cap just after the coking is finished. It will burn.
HOW TO CLEAN
12