22
How to Replace the Filter
Before replacing the filter, detach the connecting tube of the filter
you wish to replace.
▶
Detach the connecting tube using an appropriate tool (fitting separator). Damage to the
fitting and/or connecting tube may cause water leak.
6
연결호스
How to Replace the Filter (CUCKOO Filter (genuine) must be used)
Connect the outlet of the previous filter to the inlet of the replaced filter and
connect a separate water extraction tube to the outlet of the replaced filter. Then,
open the tap water supply valve to allow water to pass through.
▶
Especially for the SEDIMENT, allow water to pass through for about 5 minutes.
▶
Connect PRE CARBON 2.0 NATURAL 2.0 to the previous filters, and allow water to pass
through for about 7 minutes.
▶
Connect the RO to the previous filters, and allow water to pass through for about 10
minutes.
※
In case of RO, let the water pass through the external drain water control valve.
※
In case of RO, be careful as there are two water outlet each for purified water and drain water.
▶
Allow plenty of water to pass through or else it will affect the taste and quality of water.
▶
It is important to supply the purifier with water to check for any water leaks after filter
replacement.
7
Fitting Separator
Open
Open
Inlet
Outlet
Summary of Contents for CP-FR601SW Series
Page 1: ...CP FR601SW SERIES USER GUIDE WATER PURIFIER...
Page 29: ...29 MEMO...
Page 30: ...30 MEMO...
Page 31: ...31 MEMO...