16
How to Use
▶
Before turning on the
“
Cold
”
button, make sure the
water supply is available and the tap water supply
valve is open.
Press the
“
Cold
”
button to turn it on. It
takes 60 minutes for the cooler (condenser)
to cool the water.
1
Gently push the cold water lever.
2
Lift the cold water lever up at a 90
˚
angle,
Then continuous extraction of cold water
is available.
3
How to Get Cold Water
Full (Water Level) Display Function
▶
If the “Full” water level is not detected for 300 minutes, it is judged to be a
single water level, and the “FULL” water lamp flashes twice.
When the water level in the tank is low, the
“FULL” water lamp will gradually turn bright. This
indicates that water is being filled in the water
tank. When the water level is full, the “FULL”
water lamp lights up completely.
1
The first glass may be lukewarm. This is due to the outflow of cold water and hot
water through the same pipe. After the first glass, cold water will be extracted at a
normal temperature.
FULL
HOT
COLD
FULL
HOT
COLD
Summary of Contents for CP-FR601SW Series
Page 1: ...CP FR601SW SERIES USER GUIDE WATER PURIFIER...
Page 29: ...29 MEMO...
Page 30: ...30 MEMO...
Page 31: ...31 MEMO...
