19
How to Clean the Cold Water Tank
How to Clean the Cold Water Tank
Reassemble the separator to the cold
water tank.
▶
Cautiously press the separator into place.
11
Please install the cover on the cold
water tank.
▶
Make sure the cover of cold water tank is
completely closed.
12
Place the lid cover on the product and fasten it with screws.
Open the tap water supply valve and check whether water flows
from the hot/cold water faucets.
▶
Tighten the screw with a phillips head '+' screwdriver.
13
▶
After checking water flow through the hot water faucet, turn on the
“
Hot
”
buttons.
※
Clean the tank on a regular basis in order to drink clean and healthy water.
14
Plug power plug and press the
“
Cold
”
/
“
Hot
”
buttons to turn them on.
Open
If it is not placed properly, the operation of the
compressor will be effected, which can cause noise.
Please make sure place the separator properly.
Otherwise, foreign substances may enter into the tank.
Summary of Contents for CP-FR601SW Series
Page 1: ...CP FR601SW SERIES USER GUIDE WATER PURIFIER...
Page 29: ...29 MEMO...
Page 30: ...30 MEMO...
Page 31: ...31 MEMO...
