Cuckoo CP-FR601SW Series, User Manual

Page: 15 / 32

15
Details to Check before Use / How to Use
Details to Check before Use
Empty the tray on a regular
basis.
5
Replace and clean the filters
regularly.
▶ You need to regularly replace the
filters to ensure clean water.
▶ Refer to Page 23 for the filter replacement
cycle.
▶ Before turning on the “ Hot ” button, make sure the
water supply is available and the tap water supply
valve is open.
6
How to Get Hot Water
Press the
“
Hot
”
button to turn it on.It
takes about 30 minutes for the heater to
heat the water.
1
Gently push the hot water lever and then
press the Child Lock button.
2
Lift the hot water lever up at a 90
°
angle
and press the Child Lock button for a
continuous extraction of hot water.
3
Do not press the hot water lever while pressing the Child
Lock button. Doing so may create a splash and potential
burn.
After the discharge of hot water, slowly return the lever to its
original position. (If this is done too quickly, you may be burnt
by splashing hot water)
The first glass may be lukewarm. This is due to the outflow of cold water and hot
water through the same pipe. After the first glass, hot water will be extracted at a
normal temperature.
FULL
HOT
COLD