11
Operating Instructions
Replacement of the Pressure Packing
●
The packing serves to prevent steam from escaping out from the cooker and is firmly inserted into the lid. However, it can be
pulled out with your hands and using little bit of force. Pull out and clean the packing whenever the need arises.
●
Packing is a consumable item. Pull out the packing, clean it, and reinsert the packing as shown below if steam starts to leak
from the cooker. After reinserting the packing, check to see if steam no longer leaks. If steam leaks again after following the steps
above, purchase another packing from the service center and replace the packing in use with the new one.
●
A packing should be replaced with a new one on an annual basis. Replace it once a year. (The packing is made out of silicone.)
1
Remove the pressure packing by pulling out, as shown
in the picture.
2
Align the indicators of the pressure packing and the
pressure lid, as shown in the picture and insert the
packing.
❶
Outer installation bump
❷
Inner installation bump
●
Insertion order of the
pressure packing
❶
→
❷
3
Insert 4 of the assembly indicators. Align them in the
order of the numbers shown.
Indicators of the
pressure packing
(4 parts)
Indicators of the
pressure lid
(4 parts)
Operating Instructions
PA1000 Series_ENG_US-1.indd 11
2013-08-08 �� 11:23:13
Summary of Contents for IH PA1000 Series
