Cleaning
Unplug the power cord before cleaning. Do not spray water directly on the product and do not use benzene
or thinner to clean.
Failure to keep the cooker clean is one of the causes of rice taking on a smell while being kept warm.
Inner Pot
Do not use a rough or metallic scrubber or brush or harsh abrasives. These
products can strip or damage the coating for the inner and outer parts of the
inner pot. Thus, use a dish detergent with soft cloth or a sponge to clean.
Do not use abrasives, toothpaste, or any type of polish to bring gloss to
surface of the inner pot. Doing so can discolor or damage the coating.
Inner Pot Lid
Take a dish towel, soaked in water and then wrung out, and wipe off debris
and buildup.
Accessories
Wash the rice spatula and measuring cup clean and then dry them
completely before storing.
Inside of the Main Unit
Take out the inner pot and remove all debris and buildup from the
bottom surface before use. Debris and buildup on the automatic
temperature sensor or the bottom surface inside the cooker prevent
the cooker from monitoring the temperature, resulting in the poor
performance or malfunction of the product. Fire may occur. Clean
these parts using a dish towel that was soaked in water and then
wrung out. Be careful not to damage the metallic plate of the
automatic temperature sensor as you clean.
Do not touch or clean immediately after cooking or keeping rice warm.
A burn may occur.
Operating Instructions
PUSH
PUSH
PUSH
11
Water Tray
Hold the upper and lower parts of the water collector to detach it as shown
in the figure below. Then, thoroughly clean the water collector.
Detach the water collector and wash using a neutral dish detergent and a
sponge.
CJH-BT06 Series_ENG.indd 11
2013-05-14 �� 9:14:06
