Preset Timer
Cooking in Preset mode
(When current time is 8:00 PM and the cooker is preset to the PLAIN STICKY menu at 8:00 AM)
❶
Check to see if the clock setting is correct.
For instructions on setting the time, see p.14.
If the current clock setting is incorrect, the preset time will not be accurate.
❹
Press the PRESSURE/QUICK or PRESET button.
●
The preset time is displayed, and the fact that the cooker is in
PRESET mode is displayed with the preset key backlight and
cooking key backlight.
● The preset timer setting is the time when you want the cooking to
be finished.
●
In PRESET mode, the actual completion time may vary by 30
minutes or so, depending on the amount of rice being cooked and
the selected cooking mode.
❸
Setting the Preset Time
Example) Current time is 8:00 PM and you wish to have the
rice ready by 8:00 AM the next day.
❶
Check if the current time is 8:00 PM, and press the PRESET button.
'Preset' will be displayed and Preset mode is enabled. '7:30 AM’, the
initial preset time, will be shown on the display.
❷
Press the HOUR button once to perform the hour setting to 8:00
A.M. and the MIN button to perform the minute setting to 00. Use
the HOUR button to adjust the time in 1-hour increments and the
MIN button to adjust in 1-minute increments.
●
Rice can quickly turn sour in the summer months. Therefore, the preset timer should not be set to more than 10 hours.
● Cooking old (seal broken long ago) or dried out rice can produce an overcooked or unevenly cooked result.
● If the rice is undercooked, add more water than usual (about half a scale more).
● Starting Preset Timer cooking while the inner pot is still hot or warm from the previous cooking will cause the rice to turn sour. Allow the inner pot to cool
down sufficiently before using the Preset Timer feature.
● Certain ingredients, depending on factors such as the ambient temperature and types and state of the ingredients, may spoil. Avoid using long preset timer
settings if possible.
Menus that can be Preset
PLAIN, NURUNGJI and GAMA
HEALTH MIXED
BROWN and BARLEY
STEAM and SLOW
Available Timer Range
34 minutes to 13 hours
45 minutes to 13 hours
55 minutes to 13 hours
(Current Time+1 minute) to 13 hours
❷
Turn the Lid Lock to the ●, Lock position, select a MENU/TASTE CONTROL
in sequence, and then press the PRESET button to set the preset time.
Preset mode will be disabled if the handle is not in the Lock position and you
press the PRESET button.
Available Timer Range in Each Menu
Preset mode is disabled in the PLAIN QUICK, MIXED QUICK, MINI COOKING, or AUTO CLEAN menu.
If you set the timer to more than 13 hours, the cooker will override the setting and automatically set it to 13 hours.
Precautions for Preset Mode
● After preset cooking is completed, the previous preset time will continue
to be remembered. Thus, the next time you wish to use the Preset
option with the same settings, simply press the PRESET and
PRESSURE/QUICK buttons in sequence.
● If you select Preset mode, the key backlight feature will guide you
through the buttons used for Preset mode in sequence.
● To check the current time while the preset timer is counting down,
press and hold the HOUR or MIN button for three seconds.
● It’s possible for the cooking to finish before the preset time.
18
Flash
Flash
Flash
CJH-BT06 Series_ENG.indd 18
2013-05-14 �� 9:14:34
