Last Revised 05/09/2013
27
NOTE:
PROGRAM A TOUR refers to programming this pattern.
Running the Pattern
Using the Keyboard
Enter CALL <nn> Enter (where nn = 80 ~ 82)
Note up to 3 Patterns can be created
e.g Pattern 1 = CALL 80, Pattern 2 = CALL 81, Pattern 3 = CALL 82
Using the PTZ640 menu
To enter the menu enter CALL 95 Enter or 95 CALL on the keyboard or via the PTZ
option in the DVR. For this example we are using an Alien DVR. Using the mouse
click on the left mouse button to display the following:
Now click on PTZ and go to Presets and call preset 95 by clicking on it to display
menu. If you left click mouse when pointer is in the PTZ control box, you can drag it
to avoid it overlaying menu.
Now press IRIS+ or Open button after moving up
arrow on screen to character required, then continue
same procedure under name completed and then
press IRIS- or Close button to save.
Then move down with down arrow key to
PROGRAM A TOUR.
Press the IRIS+ or Open button to enter this option.
You will then see the following screen displayed.
Enter IRIS+ or Open button to begin recording the
pattern.
You will see the 2 minutes counting down. Now
use the direction keys to move the PTZ. You can
also use the Zoom button. You can record for the
two minutes and the unit will automatically stop
or use IRIS- or Close to end pattern before 2
minutes are reached.
