26
4. Show default, running and startup configurations
Refer to
“show default-setting copmmand”, “show running-config command” and “show start-up-
config command
” sections.
2.6.4 ACL Command
Command
Parameter
Description
Switch(config)# acl [1-192]
[1-192]
The total number of ACL rule can be
created is 192. Use this command to
enter ACL configuration mode for each
ACL rule. When you enter each ACL
rule, you can further configure detailed
settings for this rule.
Switch(config-acl-RULE)#
action [permit | copy |
redirect]
[permit | copy |
redirect]
Permit, copy or redirect the action for
this rule.
Switch(config-acl-RULE)#
action-port [port]
[port]
Specify action port (1~48)
Switch(config-acl-RULE)#
apply
Application effective
Switch(config-acl-RULE)#
destination-ipv4 any
Specify destination IPv4 address as
“ANY”
