CTI 2500P-J Series, Installation And Operation Manual

Page: 23 / 82

CTI Janus Programmable Automation Controller IOG 23
3.2.3 Setting the Module Switches
The functions of the module user switches are shown below:
Switch
Position Use Open Position Closed Position
1 Remote Firmware Update Disabled Enables firmware update via web
server. See
Section 6.3 for details.
2 SD Card Firmware Update Normal
operation Controller enters Front Panel SD Card
Firmware Update mode at startup.
See Section 6.2 for details.
3 Clear Exception Pushbutton Disabled Enables the recessed pushbutton to be
used to clear exceptions, configuration
reset, or to restore factory settings.
See
Section 5.3 .
4 SD Card Ethernet Port Setup Disabled Allows user to configure controller
Ethernet Port A via front panel SD card.
NOTE: This setting works ONLY if Switch
2 is OPEN. See
Section 3.2.9 .
5 Remote Controller Reset Disabled Enables the ability to clear exceptions,
Configuration Reset, and Restore
Factory Settings using the embedded
web server.
6 - 12 Reserved
See the illustration in the preceding
Section 3.2.2 for the location of the switches.